• • Brewery Controller

• Getting Started - Brewing with Raspberry Pi

• on 2. mai 2017
• SD CARD Preperation: First, make sure your SD card is formatted. The easy method of doing this is from Windows startmenu, search for: diskpart This will give you a small cmd window where we can manually clean and format our SD card. Why not the old fashion way? Because SD cards that have been used before are really difficult to format to their full size using the traditional Windows format option[...]

 

• • Social

• Strange and Classy

• on 30. april 2017
• På grunn av flere ting, så har vi ikke brygget noe nytt hos Leaning Man på en stund. Et lite skifte i bryggere og fremtidsplaner har tatt litt tid å komme igjennom. Vi hadde flere planer for å bygge opp et større bryggeri, samtidig som vi ønsket å være med i konkurranser og festivaler. Det started for oss med oppskrifter og smaker som var både merkelige men samtidig stilfulle. Hva betyr egentlig d[...]

 

• • Brewery Controller,
  • Brewery Equipment

• DS18B20 RTD Thermowell

• on 24. april 2017
• If you want to build your brewery setup using an arduino or a raspberry pi, you are likely to use the «one-wire» temperature sensor DS18B20, There is several guides on how to build 1 kettle up to 3 kettle systems, and building the temperature probe into the kettle. If you want to do the same with the one wire sensor, you should use a welded thermowell. There are some thermowell options available f[...]

 

• • Brewery Controller

• Automated Fermenter

• on 5. desember 2016
• We have previously completed our Automated Brewery, its now time to automate the fermenting process. The less things we need to worry about, the more we can focus on what we really love; making recipes and brewing beer! Contents Step 1 - Preparing the Raspberry Pi Connecting cables to the Raspberry Pi Step 2 - Connecting the SSRs (directly to the refrigerator) Wiring Diagram (example) Step[...]

 

• • Brewery Controller

• Automated brewery

• on 28. mai 2016
• Recently, we have expanded and upgraded the brewery for larger batches and more effecient brewing. More equipment, requires additional controls. Initially, we were looking at building a traditional controller, using PID`s and switches. This would allow us to control the pumps and heaters. This is the most traditional method for brewery controllers, and there are a lot of clever guides on how to bu[...]