Tags archives: raspberry pi
-
-
-
on 24. april 2017
- If you want to build your brewery setup using an arduino or a raspberry pi, you are likely to use the «one-wire» temperature sensor DS18B20, There is several guides on how to build 1 kettle up to 3 kettle systems, and building the temperature probe into the kettle. If you want to do the same with the one wire sensor, you should use a welded thermowell. There are some thermowell options available f[...]
-
-
-
on 28. mai 2016
- Recently, we have expanded and upgraded the brewery for larger batches and more effecient brewing. More equipment, requires additional controls. Initially, we were looking at building a traditional controller, using PID`s and switches. This would allow us to control the pumps and heaters. This is the most traditional method for brewery controllers, and there are a lot of clever guides on how to bu[...]
